Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 5:21pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
‹
Previous topic
|
Next topic
›
Pages: 1
Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition (Read 2425 times)
Marcelo Baru
New Member
Offline
Posts: 7
Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Sep 23
rd
, 2011, 11:59am
Quick question:
1) Shouldn't it read real zeros[0:lumps-1]... instead of zeros[0:2*lumps-1]?
2) And shouldn't the for be i < lumps/2 instead of i < lumps?
Thanks,
Marcelo
Back to top
IP Logged
Ken Kundert
Global Moderator
Offline
Posts: 2386
Silicon Valley
Re: Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Reply #1 -
Oct 28
th
, 2011, 7:08pm
Marcelo,
I don't think so. Remember that both the zeros and poles arrays contains two numbers for every zero and pole, the real and imaginary parts of the zero/pole frequencies.
-Ken
Back to top
IP Logged
Marcelo Baru
New Member
Offline
Posts: 7
Re: Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Reply #2 -
Oct 28
th
, 2011, 10:06pm
You're correct Ken. Second paragraph on page 94 explains it.
Cheers,
Marcelo
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.