The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 11:46am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › about hspice output file
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
about hspice output file (Read 2597 times)
lhlbluesky_lhl
Senior Member
****
Offline



Posts: 115
about hspice output file
Oct 19th, 2011, 6:39am  
when i do hspice simulation for tran analysis, the output files include only: *.ic0, *.st0, *.lis, and there is no *.tr0 file, why?

is there anything wrong here?

thanks.
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1999
Massachusetts, USA
Re: about hspice output file
Reply #1 - Oct 20th, 2011, 10:00am  
Any number of things could be wrong:
1) you didn't actually request a transient analysis
2) there was an error running the sim
3) your netlist didn't specify anything to go in the .tr0 file
 (perhaps you have a .measure?)

Take a close look at the .options in the netlist and any errors/warnings in the .lis
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: about hspice output file
Reply #2 - Oct 25th, 2011, 1:04am  
hello,
apart from the above reasons if you forget to probe any node v or i then also it wont give any .tr0 file.

Thanks,
Raj.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
spiceoracle
Junior Member
**
Offline



Posts: 21
USA
Re: about hspice output file
Reply #3 - Nov 2nd, 2011, 9:02am  
Make sure that you have the statement:

.option post

in your netlist
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.