The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 30th, 2023, 6:04pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Transmission Lines and Other Distributed Devices › create  a  1D cascade of two port network
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
create  a  1D cascade of two port network (Read 2721 times)
shegmitez
New Member
*
Offline



Posts: 3
create  a  1D cascade of two port network
Oct 13th, 2012, 11:38am  
Please can anyone  help  with  how  create a  1D cascade of two port network using MATLAB or  OCTAVE and then cascading scattering  matrices  of  multiple two port networks .
Thanks
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2023 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.