Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 10:27pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› resistor change using veriloga
‹
Previous topic
|
Next topic
›
Pages: 1
resistor change using veriloga (Read 2085 times)
sen
New Member
Offline
Posts: 1
resistor change using veriloga
May 16
th
, 2013, 8:04pm
I want to code resistor change with change in temperature and strain. how should I go about it?
Thanks in advance
Back to top
IP Logged
Geoffrey_Coram
Senior Fellow
Offline
Posts: 1999
Massachusetts, USA
Re: resistor change using veriloga
Reply #1 -
Jul 23
rd
, 2013, 12:48pm
Do you need self-heating or just a temperature coefficient (applied to the ambient temperature)?
Is the strain applied dynamically? Verilog-A would allow you to model the force applied to a model with a mechanical discipline.
Back to top
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.