Designer’s Guide Community

Pages: 1

Where to start for Verilog AMS? (Read 2935 times)

visbi New Member Offline Posts: 5 Bay area,SF	Where to start for Verilog AMS? Jul 16^th, 2013, 12:33pm Hi all, I am a newbie to verilog AMS, I am looking for some kind of help to start with verilog AMS. My immediate goal is to create test bench for simple analog circuitry like amplifer using it. Is there any way by which I can instantiate verilog files in my verilog AMS module or vise a versa? Thanks in advance
Back to top	« Last Edit: Jul 16^th, 2013, 2:22pm by visbi » Always in hurry IP Logged

Community Fellow

Offline

Posts: 678
Munich, Germany

Re: Where to start for Verilog AMS?
Reply #1 - Jul 17^th, 2013, 4:56am

If you are using Cadence tools, I would suggest the Rapid Adoption Kit "Introduction to AMS Designer Simulation" available from http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:DocumentViewer;src=wp;q... and the Verilog-AMS Language Reference available from http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:DocumentViewer;src=pubs.... A lot of information is also available on this site at http://www.designers-guide.org/VerilogAMS/.

IP Logged

visbi New Member Offline Posts: 5 Bay area,SF	Re: Where to start for Verilog AMS? Reply #2 - Jul 17^th, 2013, 11:34am Thanks Frank. I will do so.
Back to top	Always in hurry IP Logged

Community Fellow

Offline

Posts: 678
Munich, Germany

Re: Where to start for Verilog AMS?
Reply #3 - Jul 18^th, 2013, 12:40am

What I forgot to mention: You can find a pretty good introduction to modeling techniques in chapter 3 "AMS Behavioral Modeling" of the Mixed-Signal Methodology Guide, which is available in four pdf files from http://www.eetimes.com/author.asp?section_id=36&doc_id=1286611.

Ken, it might be a good idea to add this link to the section "Other Resources" of http://www.designers-guide.org/VerilogAMS/.

IP Logged

Pages: 1