The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 8:38pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design Languages › Verilog-AMS › can we do the INL and DNL measurements with verilog-AMS code
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
can we do the INL and DNL measurements with verilog-AMS code (Read 1479 times)
susona
New Member
*
Offline



Posts: 9
can we do the INL and DNL measurements with verilog-AMS code
Aug 04th, 2013, 9:09pm  
Hai all
Can we do the INL ,DNL and other ADC mesaurements with verilog-AMS if any one have some paper or documents on that please send it to me it will be very helpful for me
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.