The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 24th, 2024, 7:43am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › How to overpass and underpass printed spiral inductor in ADS
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
How to overpass and underpass printed spiral inductor in ADS (Read 2816 times)
sureshctaece
New Member
*
Offline



Posts: 3
How to overpass and underpass printed spiral inductor in ADS
Aug 26th, 2013, 11:11am  
Dear Sir,
             I have taken printed spiral inductor MSIND from Advanced Design System( palette>Tlines-Misrostrips) (ADS). How  we can have underpass or overpass for this printed spiral inductor MSIND or MSSPLR_MDS. Can you anybody help me.
Back to top
MSIND_ADS.png  
 
MSIND_ADS.png
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.