The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 3rd, 2024, 8:07am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Fastest simulation to test SNR of my ADC
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Fastest simulation to test SNR of my ADC (Read 1296 times)
aaron_do
Senior Fellow
******
Offline



Posts: 1398
Fastest simulation to test SNR of my ADC
Apr 21st, 2014, 11:15pm  
Hi all,


I'm designing a SAR ADC, and I would like opinions on the simulation I can run on my ADC to check the SNR in the shortest time possible. Currently I am going with a transient analysis of a single period of a sine wave. I somewhat randomly chose the period of the sine wave to be 1/64 times the sampling frequency.


thanks,
Aaron
Back to top
 
 
there is no energy in matter other than that received from the environment - Nikola Tesla
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.