The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 20th, 2024, 4:20am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Id and Ids difference
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Id and Ids difference (Read 1645 times)
anhnha
New Member
*
Offline



Posts: 6
Earth
Id and Ids difference
May 14th, 2014, 8:19pm  
I simulated NMOS transistors in cadence and see that there are two currents, Id and Ids.
Id : current entering the drain
Ids: current that enters the drain and leaves the source
Are they always equal?
Back to top
 
 
View Profile   IP Logged
boe
Community Fellow
*****
Offline



Posts: 615
Re: Id and Ids difference
Reply #1 - May 16th, 2014, 2:34pm  
Anhnha,
No.
- B O E
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.