The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 8:19am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Simulated transient noise stationarity
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Simulated transient noise stationarity (Read 1546 times)
W. S.
New Member
*
Offline



Posts: 1
Simulated transient noise stationarity
Dec 09th, 2015, 1:19pm  
I have a question about how transient noise is generated in Spectre transient noise analysis.  Does the noise model for devices impose any sort of stationarity to the random noise signal, or is it nonstationary?
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1999
Massachusetts, USA
Re: Simulated transient noise stationarity
Reply #1 - Jan 4th, 2016, 5:35am  
Cadence has a white paper on their support site on how transient noise is done.  You might start there and see what it says.
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.