The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 19th, 2024, 5:16am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Spectre pwl help
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Spectre pwl help (Read 2066 times)
temp12
New Member
*
Offline



Posts: 3
Spectre pwl help
Aug 09th, 2016, 4:14pm  
Hi,
I need a syntax to write a pwl statement and repeat in spectre
e.g.
0n 0 1n v1 2n v1 3n 0 4n v2 5n v2 6n 0 10n 0 and then repeat from t=0
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2384
Silicon Valley
Re: Spectre pwl help
Reply #1 - Aug 10th, 2016, 3:42pm  
Run 'spectre -h vsource' for such information.

Bascially, use something like ...

Code:
Vin (p n) vsource type=pwl wave=[0n 0 1n v1 2n v1 3n 0 4n v2 5n v2 6n 0 10n 0] pwlperiod=10ns


-Ken
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.