bit_an New Member Offline Posts: 2 Germany	Moved: Custom Bit sequence in verilog-ams Apr 10th, 2017, 1:18pm   This Topic has been moved to Verilog-AMS by Ken Kundert.
Back to top	« Last Edit: Apr 10th, 2017, 7:05pm by Ken Kundert »     IP Logged

Forum Jump » » 10 most recent Posts » 10 most recent Topics Design  - RF Design   - Analog Design   - Mixed-Signal Design »» High-Speed I/O Design   - High-Power Design   - Mixed-Technology Design Analog Verification  - Analog Functional Verification   - Analog Performance Verification Measurements  - RF Measurements   - Phase Noise and Jitter Measurements   - Other Measurements Modeling  - Semiconductor Devices   - Passive Devices   - Behavioral Models   - Transmission Lines and Other Distributed Devices Design Languages  - Verilog-AMS   - VHDL-AMS Simulators  - Circuit Simulators   - RF Simulators   - AMS Simulators   - Timing Simulators   - System Simulators   - Logic Simulators Other CAD Tools  - Entry Tools   - Physical Verification, Extraction and Analysis   - Unmet Needs in Analog CAD General  - Tech Talk   - News   - Comments and Suggestions   - Opportunities

Copyright 2002-2026 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to [email protected]. Consider submitting a paper or model.