Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Dec 5
th
, 2024, 5:25pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
High-Speed I/O Design
› Hogge PD up/dn pulses are skewed
‹ No topic |
Next topic
›
Pages: 1
Hogge PD up/dn pulses are skewed (Read 718 times)
neoflash
Community Fellow
Offline
Mixed-Signal
Designer
Posts: 397
Hogge PD up/dn pulses are skewed
Jun 01
st
, 2023, 10:50pm
This causes a large ripple at the CP output.
Is there a design that can remove this skew?
Back to top
hogge_skew.jpg
IP Logged
Pages: 1
‹ No topic |
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
»» High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.