The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 8:34pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › about PXF
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
about PXF (Read 2400 times)
mydreamhouse
Junior Member
**
Offline



Posts: 23
about PXF
Mar 02nd, 2009, 9:53am  
how to set PXF when LO is higher than RF signal?
Back to top
 
 
View Profile mydreamhouse   IP Logged
pancho_hideboo
Senior Fellow
******
Offline



Posts: 1424
Real Homeless
Re: about PXF
Reply #1 - Mar 2nd, 2009, 8:00pm  
mydreamhouse wrote on Mar 2nd, 2009, 9:53am:
how to set PXF when LO is higher than RF signal?
If you mean PXF analysis of Cadence Spectre, there is no special setting even though you simulate LSB Mixer(Upper Heterodyne) or USB Mixer(Lower Heterodyne).
Back to top
 
« Last Edit: Mar 3rd, 2009, 4:29am by pancho_hideboo »  
Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!!
http://www7.plala.or.jp/ungeromeppa/flash/kita.html
http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related
View Profile WWW Top+Secret Top+Secret   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.