The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 11:12am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Measurements › Phase Noise and Jitter Measurements › jitter measurements with Spectre. How?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
jitter measurements with Spectre. How? (Read 3488 times)
jon_jerry
New Member
*
Offline



Posts: 2
jitter measurements with Spectre. How?
Oct 20th, 2003, 4:47am  
Can I make jitter measurements for a VCO with spectre? Is there a function like phaseNoise or I have to do some calculations by hand ?
Back to top
 
 
View Profile   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: jitter measurements with Spectre. How?
Reply #1 - Oct 20th, 2003, 7:36pm  
Try actually reading previous posts on this, or Ken's
paper on the front page (or Analysis tab at the top) about
Jitter and Phase Noise measurements in PLLs.

There is a whole host of information about doing this
both in these papers and in this discussion forum. I suggest
you research that before asking questions...

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.