Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Oct 18
th
, 2024, 2:04am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› SpectreRF
‹
Previous topic
|
Next topic
›
Pages: 1
SpectreRF (Read 3954 times)
Guneet Singh
New Member
Offline
Posts: 2
SpectreRF
Nov 02
nd
, 2003, 7:35pm
HI,
Is SpectreRF compliant with Verilog-AMS HDL?
Your inputs will be of immense help.
Thanks....
Back to top
IP Logged
Ken Kundert
Global Moderator
Offline
Posts: 2386
Silicon Valley
Re: SpectreRF
Reply #1 -
Nov 3
rd
, 2003, 10:18am
SpectreRF supports Verilog-A, not Verilog-AMS. Even with Verilog-A, it places some restrictions on the models. For more information on that, see the paper on
Hidden State in SpectreRF
on
http://www.designers-guide.com/Analysis
.
-Ken
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.