The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 30th, 2024, 12:18pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Semiconductor Devices › Diode Reverse recovery model(verilogA)
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Diode Reverse recovery model(verilogA) (Read 3905 times)
Young
Guest
Diode Reverse recovery model(verilogA)
Apr 01st, 2004, 3:14pm  
Has anybody successfully made a diode model with reverse-recovery included.
I started for laurentiz's paper, but it never converged in my test circuit. I noticed that in Saber we can control the iteration steps as well as the transient steps. How can I get this kind of control in VerigloaA?


Thanks,
Young
Back to top
 
 
  IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1998
Massachusetts, USA
Re: Diode Reverse recovery model(verilogA)
Reply #1 - Jul 9th, 2004, 8:27am  
Did you try limexp()? This is supposed to limit the per-iteration change of the argument to improve convergence.
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.