The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 26th, 2024, 11:40pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › Optimization Function in the Spectre?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Optimization Function in the Spectre? (Read 4017 times)
wccheng
Junior Member
**
Offline



Posts: 31
Optimization Function in the Spectre?
May 02nd, 2004, 9:23am  
Dear all,

    Actually, does the Spectre with the optimization function for the simulation, such as the optimizaion simulation in the ADS.

    If the Spectre has this function, how is the setting?

Best Regards,

Charles CHENG
Back to top
 
 
View Profile   IP Logged
Frank Wiedmann
Community Fellow
*****
Offline



Posts: 677
Munich, Germany
Re: Optimization Function in the Spectre?
Reply #1 - May 3rd, 2004, 12:54am  
Cadence does have optimization. For details see chapter 3 of the Cadence Advanced Analysis Tools User Guide.
Back to top
 
 
View Profile WWW   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: Optimization Function in the Spectre?
Reply #2 - May 3rd, 2004, 2:56pm  
In fact there are several optimisation solutions. In addition to the one that Frank mentioned, there's also the Virtuoso Specification Driven Environment (aka Aptivia) and also NeoCircuit (a recent addition to the Cadence portfolio).

Regards,

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.