The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 21st, 2024, 1:37am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › HELP: OPAMP Offset-voltage reduction
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
HELP: OPAMP Offset-voltage reduction (Read 2165 times)
mulder
New Member
*
Offline



Posts: 1
HELP: OPAMP Offset-voltage reduction
Nov 24th, 2004, 4:41am  
I'll design a opamp.The main specification is offset-voltage.
Only five PADs and die area is under 60000um2.
So, I can't use auto-zero and trimming methods.
Except normal opamp offset-voltage reduction methods,
are there any methods ?
Help me ,please.
Thanks
Back to top
 
 
View Profile   IP Logged
101questions
Junior Member
**
Offline



Posts: 31
Re: HELP: OPAMP Offset-voltage reduction
Reply #1 - Nov 26th, 2004, 2:28pm  
Depending on process used, it looks to me a plenty of space for auto-zero circuit.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.