Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 16
th
, 2024, 8:14am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
RF Simulators
› DSB or SSB NF for direct conversion receiver
‹
Previous topic
|
Next topic
›
Pages: 1
DSB or SSB NF for direct conversion receiver (Read 4262 times)
milkdragon
Junior Member
Offline
RF idiot
Posts: 30
DSB or SSB NF for direct conversion receiver
Sep 01
st
, 2005, 5:36pm
Hi all,
Should i use DSB NF for the direct conversion receiver? I am doing simulation in SpectreRF and see different option to plot NF, one call NFieee, could any one tell what is it?
Thank you
Back to top
IP Logged
Eugene
Senior Member
Offline
Posts: 262
Re: DSB or SSB NF for direct conversion receiver
Reply #1 -
Sep 1
st
, 2005, 7:03pm
I am not yet familiar with the IEEE option but for direct conversion receivers I use the DSB option because the signal has power on both sides of the carrier.
Back to top
IP Logged
Frank Wiedmann
Community Fellow
Offline
Posts: 678
Munich, Germany
Re: DSB or SSB NF for direct conversion receiver
Reply #2 -
Sep 1
st
, 2005, 11:21pm
See
http://www.cadence.com/whitepapers/pspapn1.pdf
(this is also an appendix of the SpectreRF User Guide).
Back to top
IP Logged
milkdragon
Junior Member
Offline
RF idiot
Posts: 30
Re: DSB or SSB NF for direct conversion receiver
Reply #3 -
Sep 2
nd
, 2005, 9:45am
Thank you
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
»» RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.