The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 2nd, 2024, 2:57pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Sine wave phase
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Sine wave phase (Read 2619 times)
UofM
New Member
*
Offline



Posts: 2
Sine wave phase
Sep 06th, 2005, 2:10pm  
Hi,
how can I plot the phase difference between two sine waves (transient simulation) in cadence.
The phase difference between the sinewaves is varying and I want to look at the variation.
Thank You
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2384
Silicon Valley
Re: Sine wave phase
Reply #1 - Sep 6th, 2005, 10:01pm  
See section 5.4.7 (starting on pages 316) in "The Designer's Guide to SPICE and Spectre" by Kundert (1995).

-Ken
Back to top
 
 
View Profile WWW   IP Logged
UofM
New Member
*
Offline



Posts: 2
Re: Sine wave phase
Reply #2 - Sep 7th, 2005, 8:08am  
Thank you ken for the reply,
I will try and get my hands on the book
Thank You
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.