The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 6th, 2024, 6:00am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › question on bandgap voltage reference
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
question on bandgap voltage reference (Read 1925 times)
navin_kumar
Junior Member
**
Offline



Posts: 15
question on bandgap voltage reference
Sep 21st, 2005, 4:34am  

Hi all,
  how can we improve the PSRR for the  cmos bandgap voltage reference without using OTA ,Using current mirrors
please guide me in this respect

thanks & regards
navin
Back to top
 
 
View Profile   IP Logged
golden  apples
Guest
Re: question on bandgap voltage reference
Reply #1 - Sep 22nd, 2005, 1:52pm  
try cascode structure to improve PSRR
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.