The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 21st, 2024, 4:19pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Estimating the offset voltage with Monte Carlo?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Estimating the offset voltage with Monte Carlo? (Read 2095 times)
Analoger
Junior Member
**
Offline



Posts: 15
Estimating the offset voltage with Monte Carlo?
Nov 13th, 2005, 3:48pm  
Hello, if I want to estimate the offset voltage of an op amp, will it be more accurate if I run the Monte Carlo simulation on the extracted layout netlist (post-layout simu)? Thanks!
Back to top
 
 
View Profile   IP Logged
Terence
Junior Member
**
Offline

CAD Lab.

Posts: 23
Taiwan, R.O.C.
Re: Estimating the offset voltage with Monte Carlo
Reply #1 - Nov 14th, 2005, 6:48pm  
1.)MC can identify random mismatch
2.)Simulation with extracted view can identify systematic mismatch due to improper routings.
3.)You cannot check the mismatch due to improper placement
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.