The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 21st, 2024, 2:14pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › how to plot voltage of all the vdd nodes
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to plot voltage of all the vdd nodes (Read 1728 times)
sugar
Community Member
***
Offline



Posts: 54
how to plot voltage of all the vdd nodes
Nov 20th, 2005, 4:00am  
I use spectre to do post simulation and I want to check
IR drop on vdd net.
The vdd net is RC extracted. so there are so many nodes on this net. To plot every node voltage by manually clicking on the av_analog_extracted layout is a terrible job.
Any good method to plot all the node voltage?

Another question:
I want to check electromigration rule.
I did post-sim with spectre. Can I get current density information for every metal wire segments and vias?
Back to top
 
 
View Profile   IP Logged
sheldon
Community Fellow
*****
Offline



Posts: 751
Re: how to plot voltage of all the vdd nodes
Reply #1 - Nov 20th, 2005, 8:32am  
River,

  Use VAVO, it is the Voltage Storm extensions for
Analog designers. It works with the back-annotated
simulation flow. You can display the IR drop on the
power supply rail.

                                              Best Regards,

                                                 Sheldon
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.