The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 5:28pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › question in settling error of amp
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
question in settling error of amp (Read 2180 times)
glacieryy
Junior Member
**
Offline



Posts: 22
question in settling error of amp
May 10th, 2006, 10:49am  
Hi,all
Could anyone tell me how to understand the settling error,the settling precision of  an amp?
Also ,how to get the bandwidth based on the settling error?
I am really puzzled by this Sad

Thanks in advance.
Regards
glacier
Back to top
 
 
View Profile   IP Logged
reactgary
New Member
*
Offline



Posts: 9
Re: question in settling error of amp
Reply #1 - May 10th, 2006, 8:55pm  
Hi Glacier,

I got the same question before, and I found that there is some lecture notes (Berkeley ee240)
have the solution to this problem. It is very detail and I think it will help you. You can also
view the webcast of the lecture.


http://rfic.eecs.berkeley.edu/~niknejad/ee240/lectures.html

Good luck

Gary
Back to top
 
 
View Profile   IP Logged
glacieryy
Junior Member
**
Offline



Posts: 22
Re: question in settling error of amp
Reply #2 - May 11th, 2006, 10:41am  
Hi Gary,
Thanks to your advice.It helps me a lot Smiley

Best wishes.
Glacier
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.