Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 7:34pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Analog Design
› question in settling error of amp
‹
Previous topic
|
Next topic
›
Pages: 1
question in settling error of amp (Read 2183 times)
glacieryy
Junior Member
Offline
Posts: 22
question in settling error of amp
May 10
th
, 2006, 10:49am
Hi,all
Could anyone tell me how to understand the settling error,the settling precision of an amp?
Also ,how to get the bandwidth based on the settling error?
I am really puzzled by this
Thanks in advance.
Regards
glacier
Back to top
IP Logged
reactgary
New Member
Offline
Posts: 9
Re: question in settling error of amp
Reply #1 -
May 10
th
, 2006, 8:55pm
Hi Glacier,
I got the same question before, and I found that there is some lecture notes (Berkeley ee240)
have the solution to this problem. It is very detail and I think it will help you. You can also
view the webcast of the lecture.
http://rfic.eecs.berkeley.edu/~niknejad/ee240/lectures.html
Good luck
Gary
Back to top
IP Logged
glacieryy
Junior Member
Offline
Posts: 22
Re: question in settling error of amp
Reply #2 -
May 11
th
, 2006, 10:41am
Hi Gary,
Thanks to your advice.It helps me a lot
Best wishes.
Glacier
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
»» Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.