loose-electron
Senior Fellow
![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif)
Offline
![](https://designers-guide.org/forum/avatars/fredflinstone.gif)
Best Design Tool = Capable Designers
Posts: 1638
San Diego California
|
A couple other items needed:
- What is the resolution of your ADC? - What is the power of the blocker signal at 197MHz worst case?
In an ideal world, you want the blocker reeduced below the detection level of the ADC. However there is one other question that might need to be answered -
- What is the tolerable amplitude of aliasing products (nasty because they are in-band) post ADC?
A lot of things play off of each other.
|