The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 17th, 2024, 4:09am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › a PCM_PWM converter for class D!!
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
a PCM_PWM converter for class D!! (Read 1939 times)
ls000rhb
New Member
*
Offline



Posts: 3
a PCM_PWM converter for class D!!
Aug 22nd, 2006, 5:18pm  
I need to design A PCM_PWM converter which follow a multibit sigma-delta digital nosie shaping modulator!!
I don't know how to analysis the distortion generated in the pcm-pwm conversion process. I just know it is a UPWM process.

can any hot-heart experts give me some instructions? Thanks in advance!!!
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: a PCM_PWM converter for class D!!
Reply #1 - Aug 23rd, 2006, 8:32am  
Could you more completly define what the problem is?
thanks,
Jerry
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.