raftman
Junior Member
![* *](https://designers-guide.org/forum/Templates/Forum/default/starblue.gif)
Offline
Posts: 11
|
I am having issues elaborating my design in AMS. The ncelab log file is as follows:
ncelab: 05.40-p004: (c) Copyright 1995-2004 Cadence Design Systems, Inc. ncelab: *W,DLCILIB: Library name 'my_lib' not found, defaulting to 'MY_lib'. Please see nchelp on this error. ncelab: *W,CUNOUN: Cannot find any unit under MY_lib.my_cell:functional in the design libraries. ncelab: *E,CUCFUN: instance 'I28' of the unit 'my_cell' is unresolved in 'MY_lib.my_test_cell:schematic'.
I am concerned with the CUNOUN and CUCFUN warning/error. (I think the DLCILIB warning is just because my library has capital characters in it)
I have tried explicitly netlisting my_schematic via CIW->tools->AMS->netlist, but this does not help.
The ncelab help manual says the following about the error:
ncelab/CUCFUN = The specified instance in the named module could not be resolved using the 5.x configuration specification available.
I have no idea what the '5.x configuration specification' is.
thanks for your help!!!
|