I am having issues elaborating my design in AMS.  The ncelab log file is as follows:

ncelab: 05.40-p004: (c) Copyright 1995-2004 Cadence Design Systems, Inc.
ncelab: *W,DLCILIB: Library name 'my_lib' not found, defaulting to 'MY_lib'.  Please see nchelp on this error.
ncelab: *W,CUNOUN: Cannot find any unit under MY_lib.my_cell:functional in the design libraries.
ncelab: *E,CUCFUN: instance 'I28' of the unit 'my_cell' is unresolved in 'MY_lib.my_test_cell:schematic'.


I am concerned with the CUNOUN and CUCFUN warning/error.  (I think the DLCILIB warning is just because my library has capital characters in it)

I have tried explicitly netlisting my_schematic via CIW->tools->AMS->netlist, but this does not help.

The ncelab help manual says the following about the error:

ncelab/CUCFUN =
       The specified instance in the named module could not be
       resolved using the 5.x configuration specification available.

I have no idea what the '5.x configuration specification' is.


thanks for your help!!!

The instance I28 is an imported verilog functional block.  It only has functional and symbol views.  

I wrote the verilog externally and imported it to cadence via CIW->file>import->verilog

This schematic simulated using spectreVerilog, so I'm not sure how to proceed.  I thought AMS would compile the verilog when I compiled the toplevel testbench cell.  

Thanks!

I met with the same problem in ams elabrating.
I don't think it a compatible issue, cuz the simulation would be smooth if I had not changed the certain block.
But I still cannot find the way to overcome this error