Designer’s Guide Community

Pages: 1

IIP3 for RF front end in 802.16a (Read 1844 times)

rosaeidi New Member Offline Posts: 1	IIP3 for RF front end in 802.16a Jan 06^th, 2007, 4:33am I need IIP3 of front-end for designing a 5 GHz Mixer in 802.16a. How I can calculate the value of the power of the input interferer, Pin? I can't find it in IEEE std. only the Adjacent Channel Interference was in spec and there is nothing about Alternative one. Has anyone designed RF blocks in 802.16a or 802.16?
Back to top	ip3.JPG IP Logged

didac

Senior Member

Offline

There's a million
ways to see the
things in life

Posts: 247
manresa,spain

Re: IIP3 for RF front end in 802.16a
Reply #1 - Jan 7^th, 2007, 2:57am

Hi,
I don't know if this document http://www.eel.upc.edu/rfcs/Material/SystemLevel_Bluetooth.pdf could be useful for you but it's a demo for a bluetooth design. It calculates de IIP3 based in the adjacent channel interferences definition.
Also I suggest to look at the Wimax alliance forum, maybe they have technical docs for the design.

good luck.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›