Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 17^th, 2024, 8:24pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › Is it possible to obtain Bsim1,2 model for 0.18u ?

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Is it possible to obtain Bsim1,2 model for 0.18u ? (Read 2458 times)

Alm Junior Member Offline Posts: 18	Is it possible to obtain Bsim1,2 model for 0.18u ? Jan 10^th, 2007, 8:51am Hello, Would anybody know if it is possible to find level 13 and level 39 (BSIM1, 2) data for a 0.18u process. On the Mosis website I can only find the BSIM3v3 (level 49) data. Would there be any archives, or any other organization where I could get BSIM2 data? Regards, Alm P.
Back to top	IP Logged

Croaker Senior Member Offline Posts: 235	Re: Is it possible to obtain Bsim1,2 model for 0.1 Reply #1 - Jan 11^th, 2007, 11:33am I don't know where you can find that. Why do you need those models instead of BSIM3?
Back to top	IP Logged

Alm Junior Member Offline Posts: 18	Re: Is it possible to obtain Bsim1,2 model for 0.1 Reply #2 - Jan 11^th, 2007, 1:54pm I want to use the Meyer Capacitance model to calculate the gate capacitance. For models before level 49, this can be done by setting CAPOP=2. In level 49 and beyond, only the CAPMOD parameter is defined, and meyer models cannot be used. This is why I want to use the BSIM1, 2 models. Thanks, Alm.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.