The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 30th, 2024, 7:12am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › AMS Simulators › simulation after Place&Route
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
simulation after Place&Route (Read 2178 times)
qlmei
New Member
*
Offline



Posts: 5
simulation after Place&Route
Jan 17th, 2007, 7:08pm  
Hi, everyone

After Place&Route, i import verilog netlist to cadence and got symbol and schematic. If i want to simulate with schematic, how to include the .sdf file?
Back to top
 
 
View Profile   IP Logged
ACWWong
Community Fellow
*****
Offline



Posts: 539
Oxford, UK
Re: simulation after Place&Route
Reply #1 - Jan 18th, 2007, 4:47am  
see this relevant post

http://www.designers-guide.org/Forum/YaBB.pl?num=1156842334
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.