Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 21
st
, 2024, 5:21am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
Circuit Simulators
› how to change the axis variables in Cosmos Scope
‹
Previous topic
|
Next topic
›
Pages: 1
how to change the axis variables in Cosmos Scope (Read 2023 times)
Julian18
Community Member
Offline
Posts: 55
how to change the axis variables in Cosmos Scope
Apr 23
rd
, 2007, 1:36am
Hi, there.
I wonder if it is possible to change the default axis variables (time, frequency,etc.) to another variable, such as voltage, current, or even user defined parameters, If possible, how could i do that?
TIA!!
Julian
Back to top
IP Logged
Geoffrey_Coram
Senior Fellow
Offline
Posts: 1999
Massachusetts, USA
Re: how to change the axis variables in Cosmos Sco
Reply #1 -
Apr 23
rd
, 2007, 4:13am
Once upon a time I did an ac analysis with a dc sweep; the default axis was frequency, but I was able to switch to plotting the variables against the dc sweep variable (voltage in my case).
Back to top
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
»» Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.