Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Oct 1^st, 2024, 4:22am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › area of 12bit ADC

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

area of 12bit ADC (Read 2670 times)

hawaiime New Member Offline Posts: 2	area of 12bit ADC Apr 24^th, 2007, 12:27am Does anyone know how big will be a 12bit ADC if using 0.35um process?
Back to top	IP Logged

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Re: area of 12bit ADC Reply #1 - Apr 24^th, 2007, 1:41am I guess it is 1 ~ 2 mm² depending on the design. You'd better search the IEEE Explorer. :) Yawei
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: area of 12bit ADC Reply #2 - Apr 24^th, 2007, 3:28am This is enormously dependent on the ADC architecture - whether is it flash, half-flash, sigma-delta, SAR, dual-ramp, etc, etc. Some of these can be pretty enormous, and some can be tiny. It depends... Andrew.
Back to top	IP Logged

hawaiime New Member Offline Posts: 2	Re: area of 12bit ADC Reply #3 - Apr 24^th, 2007, 8:43pm Thanks guys!
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.