The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 5th, 2024, 1:19pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › how to provide transistor parameters in dxdesigner
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to provide transistor parameters in dxdesigner (Read 1809 times)
alihusaini
New Member
*
Offline



Posts: 1
how to provide transistor parameters in dxdesigner
May 13th, 2007, 5:11am  
hello all
i am stuck with this small problem.I am drawing a schematic in dxdesigner(systemvision by mentor graphics) but i could not specify MOS parameters in the schematic.
I will be thankful if someone helps..
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.