The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 3:31pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › cells summary in schematic
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
cells summary in schematic (Read 2542 times)
Cri Azzolini
Community Member
***
Offline



Posts: 48
University of Parma, Italy
cells summary in schematic
Jun 19th, 2007, 4:55am  
Hi all,

I would like to make a summary of all the cells (and sub-cells...) placed in a top-level Virtuoso schematic.
A function called "Summary" is available in Virtuoso Layout Editor but I am not able to find a similar function in Virtuoso Schematic.

Does anybody find a solution?
Many thanks in advance,
Cri
Back to top
 
 
View Profile WWW cri.azzolini   IP Logged
ACWWong
Community Fellow
*****
Offline



Posts: 539
Oxford, UK
Re: cells summary in schematic
Reply #1 - Jun 21st, 2007, 2:41am  
you can use hierarchy editor (i.e. create a config view) and then click the view to tree rather than table.

or you can write some skill to do it. Some source/example code is available to cadence users on sourcelink.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.