The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 1:20pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › Need program to extract schematics from a netlist
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Need program to extract schematics from a netlist (Read 3373 times)
Unique
Junior Member
**
Offline



Posts: 13
Russian Federation
Need program to extract schematics from a netlist
Jul 24th, 2007, 3:51am  
Hello to everyone!
Could You advise me some programs which extract schematics from the netlist?

Best regards,
Dina
Back to top
 
 
View Profile Unique 200831583   IP Logged
topquark
Community Member
***
Offline



Posts: 61
Thames Valley, UK
Re: Need program to extract schematics from a netl
Reply #1 - Jul 25th, 2007, 10:38am  
Hey Dina

Try EDIF's N2S converter - www.softjin.com/img/n2s.pdf
I haven't used it myself but have heard it does a good job with most netlist in HSPICE or spectre format.
Back to top
 
 
View Profile   IP Logged
Unique
Junior Member
**
Offline



Posts: 13
Russian Federation
Re: Need program to extract schematics from a netl
Reply #2 - Jul 29th, 2007, 11:15pm  
Thanks a lot!
I'll try it
Back to top
 
 
View Profile Unique 200831583   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.