The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 18th, 2024, 9:21am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › sample switch  
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
sample switch   (Read 1889 times)
cktlife
Junior Member
**
Offline



Posts: 11
sample switch  
Aug 22nd, 2007, 8:17am  
Hi all,

T/H switch has the issue of charge injection and clock feedthrough. I wonder if there is any way or paper to estimate the settling time of charge injection onto the hold capacitor.

Thanks,
Back to top
 
 
View Profile   IP Logged
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Re: sample switch  
Reply #1 - Sep 8th, 2007, 8:20pm  
The charge injection and clock feedthrough may introduce distortion and offset. However, I don't think it will impact the settling time.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.