The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 4:22pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › Jitter Issue
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Jitter Issue (Read 2361 times)
squirrelcn
New Member
*
Offline



Posts: 2
Santa clara
Jitter Issue
Oct 02nd, 2007, 9:34pm  
I have a confusion of the "Jcc", "Jc" and "Jee".
It's the first time encounter "Jee" in the latest version cadence tool.
It is important to distinguish these three items.
Thanks for your hand! Kiss
Back to top
 
 
View Profile   IP Logged
Stefan
Senior Member
****
Offline



Posts: 124
Re: Jitter Issue
Reply #1 - Oct 3rd, 2007, 2:58am  
I assume you read Ken's Paper on Jitter Measurements.The difference between cycle to cycle Jitter (Jcc), k-cycle jitter (Jc) and edge-to-edge jitter (Jee) is explained there in detail. I'm quite confused about Jee in cadence tools... Where did you find it ?
Back to top
 
 
View Profile 16731287   IP Logged
squirrelcn
New Member
*
Offline



Posts: 2
Santa clara
Re: Jitter Issue
Reply #2 - Oct 9th, 2007, 5:53pm  
Thanks a lot!
I have find the answer following your guide Wink
And I found the Jee in the 5.1.41 USR4 release of cadence!
Thanks again!
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.