Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 18^th, 2024, 3:27pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › Circuit Simulators › Monte Carlo Model Selection

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Monte Carlo Model Selection (Read 2150 times)

rajath New Member Offline Posts: 9	Monte Carlo Model Selection Feb 26^th, 2008, 1:09am Hi all, I plan to run a monte carlo analysis on a circuit for mismatch, and when I checked the model files, there seem to be two sections I can choose from: mc and stat. What exactly is the difference between these two models? Appreciate any help! regards, rajath
Back to top	IP Logged

bernd Senior Member Offline Posts: 229 Munich/Germany	Re: Monte Carlo Model Selection Reply #1 - Feb 26^th, 2008, 6:31am The stat section 'statisics block' specifies the statistical distribution, process variation. It defines which parameter and how should be varied through a Monte Carlo simulation. The mc section then should include the transistor model with the parameters to vary. Best is to check yourself your model file. Bernd
Back to top	Just another lonesome cad guy IP Logged

bernd Senior Member Offline Posts: 229 Munich/Germany	Re: Monte Carlo Model Selection Reply #2 - Feb 26^th, 2008, 6:38am Parallel or at least related thread. http://www.designers-guide.org/Forum/YaBB.pl?num=1203976519 Bernd
Back to top	Just another lonesome cad guy IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.