The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 17th, 2024, 1:11pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › Simulation of Very low IF Modulator in Spectre RF
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Simulation of Very low IF Modulator in Spectre RF (Read 1716 times)
Faisal
Community Member
***
Offline



Posts: 90
Simulation of Very low IF Modulator in Spectre RF
Mar 29th, 2008, 1:11pm  
Hi,

I am just wondering if there is an efficient way (in terms of simulation time and memory resources) to simulate Very Low Modulator e.g. if one frequency is 2.4 GHz and other frequency is 10k, it takes a quite some time to simulate either using PSS or QPSS.

Regards,
Faisal Mateen.
Back to top
 
 
View Profile   IP Logged
ACWWong
Community Fellow
*****
Offline



Posts: 539
Oxford, UK
Re: Simulation of Very low IF Modulator in Spectre
Reply #1 - Mar 30th, 2008, 3:22pm  
You might find envelope analysis helpful for this type of simulation.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.