Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

need bsim3v3.3 model card (Read 822 times)

akki

New Member

Offline

Posts: 7
india

need bsim3v3.3 model card
Mar 31^st, 2008, 10:15am

hi,
I am designing a cml buufer working at frequency around 10 gbps, till now I've done simulation with bsim3v3.1(0.18um) in spectre , now i want to use bsim3v3.2(0.18um) which is extended rf model for more accurate result.

Unfortunately i am unable to find model card for the same on mosis and bsim site also.

i would really be grateful if someone can provide me d model file.

thanks .
-akki

IP Logged

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Re: need bsim3v3.3 model card Reply #1 - Apr 6^th, 2008, 5:48am Hi akki, You'd better ask the guy who have provided the process and model to you ever before, i.e., the foundry or MOSIS. Yawei
Back to top	IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: need bsim3v3.3 model card Reply #2 - Apr 17^th, 2008, 3:56pm Get this from the PDK associated with the foundry that you are designing for. This will be very specific to the foundry.
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

jbdavid Community Fellow Offline Posts: 378 Silicon Valley	Re: need bsim3v3.3 model card Reply #3 - Jun 19^th, 2008, 8:11pm Or refer the bsim manual and make your own changes.. Berkeley has a bsim manual website.. -- OR you could take your test die to a service provider and have them re-extract the models in the newer format.. but if youre going to do that, why not go to bsim4?
Back to top	jbdavid Mixed Signal Design Verification IP Logged

Pages: 1

‹ Previous topic | Next topic ›