The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Oct 31st, 2024, 5:03am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › THD in opamps
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
THD in opamps (Read 1651 times)
filipe
Junior Member
**
Offline



Posts: 22
Brasil
THD in opamps
Jun 30th, 2008, 5:49pm  
Hi,
How can I measure the THD at the output of an opamp, since it varies according to output swing of the ompap????
Is there any standard about this???
Thanks a lot
Filipe
Back to top
 
 
View Profile filipe filipe   IP Logged
buddypoor
Community Fellow
*****
Offline



Posts: 529
Bremen, Germany
Re: THD in opamps
Reply #1 - Jul 1st, 2008, 1:15am  
No, there is no "standard" as it is quite normal that the THD rises with amplitude. But , consequentely, this means that for each THD the output level should be given.
Back to top
 
 
LvW (buddypoor: In memory of the great late Buddy Rich)
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.