The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Oct 31st, 2024, 5:03am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › design bulk DC/DC converter to convert 5v to 1.8v use the 3.3v process
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
design bulk DC/DC converter to convert 5v to 1.8v use the 3.3v process (Read 1110 times)
asdfjkl
New Member
*
Offline



Posts: 1
design bulk DC/DC converter to convert 5v to 1.8v use the 3.3v process
Jul 02nd, 2008, 5:37am  
Hi,
 I design a DC/DC converter to converter 5v to 1.8v with voltage control PWM mode, but the process can only support 3.3v transistor. What should we do in the circuit design to avoide the hot electron? Thank you.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.