The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 3:33am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › Receiver sensitivity
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Receiver sensitivity (Read 2351 times)
Berti
Community Fellow
*****
Offline



Posts: 356
Receiver sensitivity
Aug 31st, 2008, 11:56pm  
Hi,

Is the minimum receiver sensitivity and the blocker-mask the same for GSM and EDGE, or UMTS and HSDPA, respectively?

Thanks, regards.
Back to top
 
 
View Profile   IP Logged
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Re: Receiver sensitivity
Reply #1 - Sep 1st, 2008, 7:43pm  
Berti,

Why don't you refer to all the specs for those standards?


Yawei
Back to top
 
 
View Profile   IP Logged
ACWWong
Community Fellow
*****
Offline



Posts: 539
Oxford, UK
Re: Receiver sensitivity
Reply #2 - Sep 2nd, 2008, 12:27am  
i seem to recall that GSM and EDGE have subtly different blocker masks and sensitivity levels on the handset side. Further differences on the basestation side exist.
not sure about umts and hsdpa but i suspect they'll be subtly different too. As yawei mentioned, checkout the 3GPP standards
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.