The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 8:40am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Behavioral Models › Can any body give verilog-A code for PWM switch?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Can any body give verilog-A code for PWM switch? (Read 5378 times)
ADI
New Member
*
Offline



Posts: 1
Can any body give verilog-A code for PWM switch?
Sep 05th, 2008, 1:04am  
I am new to the Modelling of DC-DC converter. I would like to do modelling of DC-DC converter. For that i want to start from PWM SWITCH. please help on this...
Back to top
 
 
View Profile   IP Logged
Jess Chen
Community Fellow
*****
Offline



Posts: 380
California Bay Area
Re: Can any body give verilog-A code for PWM switch?
Reply #1 - Sep 21st, 2008, 2:15pm  
You might try checking out the High Power section of the forum. There are some PWM models posted there.

http://www.designers-guide.org/Forum/YaBB.pl?num=1138941612/45
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.