Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 16
th
, 2024, 2:25am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› Has somebody designed a wideband PA?Please help me!
‹
Previous topic
|
Next topic
›
Pages: 1
Has somebody designed a wideband PA?Please help me! (Read 2566 times)
Lilylily
Junior Member
Offline
Posts: 15
Has somebody designed a wideband PA?Please help me!
Oct 05
th
, 2008, 7:37pm
Has somebody designed a wideband PA?Does a wideband PA need to specify a central frequency?If the spec requires the PSD below 0dBm,how to make power at every frequency below the requirement.
Thanks!
Back to top
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: Has somebody designed a wideband PA?Please help me!
Reply #1 -
Oct 9
th
, 2008, 11:49am
Could you please clarify the question a bit more?
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
SimpleRF
New Member
Offline
Posts: 1
Re: Has somebody designed a wideband PA?Please help me!
Reply #2 -
Nov 26
th
, 2008, 1:26pm
New Wideband PA from TriQuint :
www.triquint.com/powerband
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.