The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 16th, 2024, 2:23am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › Has somebody designed a wideband PA?Please help me!
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Has somebody designed a wideband PA?Please help me! (Read 2565 times)
Lilylily
Junior Member
**
Offline



Posts: 15
Has somebody designed a wideband PA?Please help me!
Oct 05th, 2008, 7:37pm  
Has somebody designed a wideband PA?Does a wideband PA need to specify a central frequency?If the spec requires  the PSD below 0dBm,how to make power at every frequency  below the requirement.
Thanks!
Back to top
 
 
View Profile Lilylily   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: Has somebody designed a wideband PA?Please help me!
Reply #1 - Oct 9th, 2008, 11:49am  
Could you please clarify the question a bit more?
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
SimpleRF
New Member
*
Offline



Posts: 1
Re: Has somebody designed a wideband PA?Please help me!
Reply #2 - Nov 26th, 2008, 1:26pm  
New Wideband PA from TriQuint : www.triquint.com/powerband
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.