Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 21^st, 2024, 7:27am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › Circuit Simulators › writing transient node data to a file(in text format)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

writing transient node data to a file(in text format) (Read 2143 times)

paddu New Member Offline Posts: 7	writing transient node data to a file(in text format) Oct 13^th, 2008, 8:39pm how to write transient data of a particular node to a file (in text format) in cadence spectre? (EX : if it is voltage waveform, how to output Volatge vs time inforamtion in to a file(in text format))
Back to top	IP Logged

Ken Kundert Global Moderator Offline Posts: 2386 Silicon Valley	Re: writing transient node data to a file(in text format) Reply #1 - Oct 13^th, 2008, 9:37pm Easily done with Verilog-A. Just use a strobe statement in the analog block. -Ken
Back to top	IP Logged

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Re: writing transient node data to a file(in text format) Reply #2 - Oct 20^th, 2008, 3:27am Print it with the Calculator in the Analog Design Environment. Yawei
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.